K2 KUNG FUJAS Skis with Marker Griffon SchizoFrantic Bindings 2011
Comes with FREE Ski Poles FREE Ski DVD FREE USA Shipping!!!!
The Legend Continues. Bigger, Badder and Better
Pep Fujas demanded a Factory Team ski that he could charge every type of terrain with, so our engineers worked with him to develop a wider Kung Fujas for 2010-11. This new Pro Model twin tip is big enough to float and take on the backcountry, yet nimble and poppy enough to shred the resort and the park. Pep added All-Terrain Rocker to the Kung Fujas ski to enhance its performance in soft or variable snow, and retained the Bi-Directional taper for optimal switch carving. The result is a new K2 Kung Fujas that truly is a quiver of one.
Baseline: All Terrain Rocker -70% Camber/30% Rocker
Performance: Powder: 50% Park: 50%
Sizes: 169, 179, 189
Radius: 19m @ 179/Bi-Directional Taper
Construction: Twin Tech with Vertical ABS Sidewall
Core: Aspen, Paulownia
Binding Options: Comes with Griffon Schizo Frantic
Features: Removable rivets for available pre-cut climbing skin, (sold Seperatly) Powder Tip.
These skis come with pre-drilled insert holes for the Griffon Schizo Frantic Bindings, just screw them on and your ready to ride.
Featuring an elevated tip for variable and soft snow performance and camber underfoot for power, energy and edge-hold in firmer conditions.
K2 SchizoFrantic Inserts The K2 SchizoFrantic inserts allow for super fast mounting of the new K2/Maker Griffon SchizoFrantic binding system without the need for any drilling. The Schizo binding itself uses the tested and proven Triple Pivot Elite toe and Inter Pivot Heel with an ultra lightweight, low stand height track and cable system that enable you to mount once and adjust a full 6 cm along the ski. The insert patterns allow you to ski at the ‘core center’ mark for the optimal park and switch performance, or all the way back at a more traditional mounting location for powder of softer snow conditions. The increased surface area of the insert rings provides twice the pullout strength of standard binding screws.
Bi-Directional Taper The tip is still wider but closer in width to the tail. This lets the ski perform exceptionally well while skiing in the forward direction but the taper enables the skier to have similar switch arc for better and more consistent switch riding.
Twin Tech Sidewalls This new Twin Tip specific construction process increases the durability of sidewall skis. A traditional sidewall construction produces a 90 degree angle where the top material and sidewall meet. The Twin Tech construction actually rolls the top material into the sidewall reducing the angle that is prone to abuse.
Powder Specific Tip Design The widest point of this tip is the forward contact point as opposed to 7cm in front of it like most of our shaped skis. This design makes the ski more stable and predictable because it won’t hook or grab erratically in windblown snow and other variable conditions that you’re likely to encounter in the backcountry.
Tip and Tail Plates and Rivets K2 introduced tip and tail rivets 7 years ago on the Factory Series skis. They were functionally developed for additional protection, reinforcing the tip and tail of the ski against delamination. Although function is still the primary purpose, K2 has evolved the rivets and plates into stylized components.
Removable Tip and Tail Rivets K2 tip and tail rivets have evolved to allow the addition of a pre-cut climbing skin onto the ski for all your backcountry access needs. The skin attachment is offered on the HellBent, obSETHed, Kung Fujas and MissBehaved.
ABS Sidewalls ABS is a polymeric material used in sidewall construction that primarily functions to protect the core. K2 uses ABS because of its dense characteristics and impact toughness that not only aid in the direct transmission of power but also make it very durable and resistant to moisture.
Z Clip Attachment Quick, simple and lightweight, the Z Clip utilizes the hole in the ski tip and eliminates the skin fold-over required with typical D rings. This not only reduces weight, but gets rid of the buildup of snow that accumulates under the fold, which eventually peels your skins off.
3.5 MM Edges Most of our factory series skis come standard with a thicker more durable steel edge to prolong the life of the ski. Normal thickness of edges is around 2.5mm whereas the Factory Series skis’ use a 3.5mm edge to withstand the added abuse. This thicker edge is far more resistant to crackingand grinding for a more durable, longer lasting ski.
Cut Skin Compatible These precision cut skins are designed to work with specific K2 BackSide AND Factory Team models including the Darkside, Sidestash, Hardside, Coomback, GotBack, Hellbent, ObSETHed, and Kung Fujas. Simply choose the skin for your length. Go Skiing.
Tail Strap Clip This adjustable strap interfaces with the tail hole to secure and register the skin to the center of the ski. Unlike most clips which create friction by dragging in the snow every step, this clip sits on top of the ski, thereby improving glide and efficiency.
Torsion Box Technology Torsion Box construction is the foundation for the widest range of skis designed by K2. Depending on the dimensions of a ski, and the amount of flex and torsion designed into it, one model of a Torsion Box ski can differ greatly from another. The versatility in the construction enables us to build everything from entry-level through expert skis. While there will be significant differences between a DarkSide and a MissConduct, they do share the common traits of ease, forgiveness, responsiveness, and energy that can be found in all Torsion Box skis.
Triaxial braiding consists of braiding fiberglass around a wood core to provide torsional rigidity for added control. Developed in 1988 by K2 engineers, the patented triaxial braiding machine interlocks strands of fiberglass around a milled wood core. This unique method produces skis with great torsional strength, that maintains the lively flex patterns of the wood core.