Armada THall Tanner Hall Demo Skis with Marker Griffon Demo Bindings 2014
*Please note all demo skis are sold in as is condition. They have been used for one season.*
Only available in 176cm!!! Bindings adjust easily to any size ski boot!
We would rate the condition of these skis 7/10.
There is normal wear and tear from one season's worth of use.
The THall is the top shelf traditional park ski to make urban rails, park jumps and jibs your playground. Its full positive camber provides stability, while its TZone Core provides a flex profile with a softer tip and stiffer tail that give the THall a looser feel. CK Stringer throughout the tail add durability and long lasting pop.
Armada Skis 2014 Tech Feature
Traditional camber engages the tip and tail of the ski, enhancing ease of entry and exit into and out of a turn, while maintaining solid edge hold.
ABS sidewall meets cap construction – the best of both worlds. This engineering method combines the lightweight cap construction in the tip and tail with ABS sidewall underfoot, resulting in enhanced edgehold and significantly lower swing and overall weight.
Three high density wood stringers sit along ultra light wood for a powerful, durable core with explosive energy return. Triple Zone cores resist compression without creating unnecessary weight.
This edge has an oversized height and width and the steel is heat-treated to a proprietary hardness which helps resist breaking and tearing out from rails, ledges and any other abuse it might meet.
The S7 features a gliding additive for increased speed and longevity. Our toughest base, find the S7 on any ski that’s looking for rails, ledges, and boxes as much as snow.
We know from the core out exactly how each ski should react, so three kinds of fiberglass laminates are used in combination to deliver the exact amount of flex and torsional rigidity. Bi-axial fiberglass runs in an “x” pattern down the ski to control lateral flex. Uni-directional fiberglass controls flex along the length of the ski. And tri-axial fiberglass, with fibers running in three directions, beefs up the center of the ski. The permutations of the three fiberglasses are nearly limitless and allow us to precision tune the performance of every ski we make.
A blend of Carbon/Kevlar stringers that run along the tail of the skis to help stabilize it. This creates a better landing platform, especially when your weight is further back than intended. It also increases snap and adds pop to ollies.
*Comes with 1 Year Limited Manufacturer Warranty*
Marker Griffon Bindings
The lighter version of the Jester, providing the same features for younger and lighter riders. Stand height without ski is only 19 mm. The Griffon features no-pull-out screws and a centralized swing weight: cross-axis toe spring and compact mounting lead to a short binding, ideal for spins & twists.
DIN Range 4 - 12
Recom. Skier's Weight < 120
Stand Height w/o ski 23
Toe System Triple Pivot Elite
AFD Gliding Plate stainl. steel, height adjustable
Step-in Heel Inter-Pivot Heel
Special Features centralized swing weight, level stand position, freeride brake
Color Combinations white - gun metal