Rome Factory Rocker Snowboard 2018

Rome Factory Rocker Snowboard 2018

From day 1 to day 100, the Factory Rocker brings the fun with a responsive blend of rocker’s smoothness and positive camber’s snap. Designed to let you hold an edge on firm days, spray powder on deep days and rip the whole mountain from the first snowfall till the hill is barely open in April.

Tech

MntPop Rocker 2.0 Camber

Design: Three zones of camber: a moderate amount of rocker between the feet and positive camber in the nose and tail.

Defining Feel: With positive camber in the nose and tail, this design is highly responsive for ripping carves and slashing powerfully. With rocker between the feet, this design floats better in powder and changes direction easily at slower speeds. The result is a highly versatile all-mountain feel that is both powerful and playful.

True Twin: Our True Twin shapes are perfectly symmetrical. If you cut the board in the dead middle of the board, the nose piece and the tail piece will be identical in shape and flex. If you remove the graphic from a True Twin, there is no way to tell the nose from the tail. With their balanced feel and equality toward switch riding, this shape helps drive the personality of our park boards and the more jump-oriented all-mountain freestyle boards.

Pop Core Matrix: The everyday balance of response and lightness, this go-to design is built primarily of responsive, strong wood, with two zones of a lighter wood species.

StraightBiax Laminate: For boards where the focus is on fun and a more mellow feel, pure 90 degree fibers drive the personality.

QuickRip Technology: To give both response and playfulness to our rocker boards, we created QuickRip Sidecut to balance the inherently looser feel that rocker provides. You still get the butteryness of rocker, but you also get added power and response when you want it. We integraet two off-set sidecuts that create one sidecut zone in the nose, one between the feet, and one in the tail. The radius of the zones in the nose and tail are the same radius. We don’t blend where these radii meet, but rather deliberately create “bumps” that we call Mid-Board Contact Points. These Mid-Board Contact Points serve as the end of the running length at slow speeds—this allows the rocker boards to ride between these points at slow speed for easy maneuverability. At higher speeds when you are using the full running length, these Mid-Board Contact Points are “bumps” that add edge grip and power.

XTRD Base: A strong foundation of extruded base material that is plenty fast and super easy to repair.

Bambooster Dual Inline Technology