2010
Bones Bearings
Bones Swiss Ceramics are in a class by themselves.
If you want the best there is, this is it. The Cerbec®
Ceramic balls are much lighter, harder, stronger,
and longer lasting than the finest steel balls.
Features
* Accelerate faster
* Roll faster and farther
* Resist dirt and moisture better
* Help to repair injuries to your races caused by
dirt
* High speed Nylon® ball retainer for greater
strength and speed
* Skate Rated™ clearances, tolerances, materials
and lubricant provide the best performance and durability
possible.
Contents
* Set of 8 bearings
* 4 bearing spacers
* Instructions
* Sticker
This new bearing is similar to the original Bones®
Swiss bearing, but with a redesigned inner race and
two labyrinth seals to keep dirt out even better than
before. Bones Labyrinth shields are non-contact, so
that they do not increase friction, only the distance
dirt particles must travel to get past the shields.
The only difference you will notice is that the labyrinth
shield Bones will last several times longer than the
original Bones Swiss between cleanings. This significant
increase in service life comes at a very small increase
in retail cost, so the value is greatly increased.
Features
* Double labyrinth non-contact, removable rubber
shields allow easy cleaning and low friction.
* High speed Nylon® ball retainer provides added
speed and strength.
* Pre-lubricated with Speed Cream™ racing lubricant.
* Skate Rated™ clearances, tolerances, materials
and lubricant provide the best performance and durability
possible.
Contents
* Set of 8 bearings
* 4 bearing spacers
* Instructions
* Sticker
This unique design features six larger diameter balls
instead of the seven balls used in most 608 bearings.
The advantage of this design is higher speed, faster
acceleration, greater strength and durability.
Features
* Single, non-contact, removable rubber shield allows
for easy cleaning and less friction.
* High speed Nylon® ball retainer for greater
strength and speed.
* Pre-lubricated with Speed Cream™ racing lubricant.
* Skate Rated™ clearances, tolerances, materials
and lubricant provide the best performance and durability
possible.
Contents
* Set of 8 bearings
* 4 bearing spacers
* Instructions
* Sticker
Legendary Original Bones® Swiss Bearings are the
optimum combination of Bones Skate Rated™ design
and Swiss precision manufacturing creating the standard
by which all other bearings are measured. For more
than 24 years preferred by the world’s top professional
skaters. Proven, professional competition-grade speed
and durability make Bones Swiss normally last several
times as long as ordinary ABEC rated bearings.
Features
* Single, removable, non-contact rubber shield allows
easy cleaning and low friction.
* High speed Nylon® ball retainer provides added
strength and speed.
* Pre-lubricated with Speed Cream™ racing lubricant.
* Skate Rated™ clearances, tolerances, materials
and lubricant provide the best performance and durability
possible.
* Best selling high end skate bearing in the U.S.A.
Contents
* Set of 8 bearings
* 4 bearing spacers
* Instructions
* Sticker
The story of Ceramic Super REDS™, is simple,
take the superior steels used in our Super REDS™
and swap the steel balls for Grade 5, Silicone Nitride,
Hot Isostatically pressed ceramic balls and you have
Bones Ceramic Super REDS™.
Bones Ceramic Super REDS™ are lighter, and
provide faster acceleration, because the balls weigh
much less. They create less friction and are thus
faster than Super REDS™, with or without lubricant!
When you get dirt into your Ceramic Super REDS™,
the ceramic balls will help to re-polish the steel
races flat again, providing a self-healing benefit
because ceramic balls are so much harder than steel.
Finally, ceramic balls will not rust, further lengthening
their life. Ceramic Super REDS™ use a bone colored
shield with laser engraved outer races for identification.
Features
* Features Grade 5, Silicone Nitride, Hot Isostatically
pressed ceramic balls.
* Higher quality steel races, and a superior surface
finish.
* Single, non-contact, removable rubber shield for
easy cleaning and less friction.
* High speed Nylon™ ball retainer for greater
strength and speed.
* Pre-lubricated with Speed Cream™ racing lubricant.
* Skate Rated™ clearances, tolerances, materials
and lubricant provide the best performance and durability
possible.
Contents
* Set of 8 bearings
* Instructions
* Sticker
Super REDS™ are designed from the ground up
to be the best bearing on the market at this price
point. What Super REDS™ are not, is a REDS™
bearing with just better super finishing (surface
polishing). Super REDS™ are a superior quality
bearing, using higher quality steel races, better
quality and grade balls, and a superior surface finish.
The result is a bearing that is as fast as REDS™,
but quieter, smoother, and longer lasting. Super REDS™
use a black shield and laser engraving to differentiate
themselves from original REDS™.
Features
* Higher quality steel races, better quality and
grade balls, and a superior surface finish.
* Single, non-contact, removable rubber shield for
easy cleaning and less friction.
* Pre-lubricated with Speed Cream™ racing lubricant.
* High speed Nylon™ ball retainer for greater
strength and speed.
* Skate Rated™ clearances, tolerances, materials
and lubricant provide the best performance and durability
possible.
Contents
* Set of 8 bearings
* Instructions
* Sticker
Bones REDS™ are manufactured in China to our
Bones Skate Rated™ specifications in a manufacturing
facility dedicated to producing the highest quality
skate bearings in China. They are inspected twice
before being shipped to skaters and offer the greatest
combination of performance, durability and low cost
in the industry. Because they offer near Bones Swiss
performance at a fraction of the cost, they have become
the best selling bearing brand in the U.S.A.
Features
* Single, non-contact, removable rubber shield for
easy cleaning and less friction.
* High speed Nylon® ball retainer for greater
strength and speed.
* Pre-lubricated with Speed Cream™ racing lubricant.
* Skate Rated™ clearances, tolerances, materials
and lubricant provide the best performance and durability
possible.
Contents
* Set of 8 bearings
* Instructions
* Sticker
NO
Sales Tax- (outside of California)
1 Year Manufacturer Warranty
Email this product to a friend!
Other Items our customers have purchased with these
skis:
Skis,
Bags,
Gloves,
Bindings,
Boots,
Clothing
|
